Your Cart is Empty
PMADM1M2
| Dual Mount Part # | Height | Fits These Electronics |
| PMA-DM1-M2 | 13.25" |
18" - 24" closed dome radars 16" - 24" satdomes Cameras |
| PMA-DM124-M2 | 33" |
18" - 24" closed dome radars 16" - 18" satdomes Cameras |
| PMA-DM2-M2 | 23.75" |
Up to 4.5' open array radars |
| PMA-DM3-M1 | 27.75" |
Up to 4.5' open array radars 16" - 18" satdomes |
$1,125.00
Mount a compatible satellite dome, camera or other marine electronic device above your radar with a Seaview Modular Dual Mount. Choose the mount and top plate for your specific equipment and installation. The modular top plate is sold separately, and the oval hollow mast section provides a route for cables. Review the model-specific drawings below and confirm equipment clearance before ordering.
Download the dimension drawings below. Can't find what you're looking for? Contact us!
| Seaview Part Number | Dimensions |
| PMADM1M2 / PMADM1M2BLK | Download |
| PMADM124M2 | Download |
| PMADM2M2 / PMADM2M2BLK | Download |
| PMADM3M1 / PMADM3M1BLK | Download |
| PMADM4M1 | Download |
Specifically designed to not take up a large amount of space results in the perfect solution where space saving is a must.
A Dual Mount gives your radar or satdome extra height clearance to tower above anything that could obstruct its view, while still maintaining a small footprint. This also allows for all electronic cables to pass through one hole for cleaner installation.
The lower platform is welded onto the main body of the mount. This platform comes pre-drilled for just about all open and closed dome radars. The above image shows a lower platform on a dual mount that’s for a closed dome radar. When selecting a Seaview dual mount be sure to check to make sure that the particular one you are looking at is for a closed dome radar or a open array radar. The dual mounts that are for an open array radar have an extended lower platform so that the antenna clears the main body of the mount.
The top platform is where you bolt the Top Plate to. Seaview developed the Top Plate to make product selection easier for the customer and to enhance the look of these mounts. Long gone are the days of top plates with a bunch of holes in them.
